fEARful 15/6 Deluxe Kit

fEARful 15/6 Deluxe Kit

15/6 Crossover CBG or True
Greenboy CBG
True Crossover (tweeter required)
CBG 15/6 Xover Options
Parts Only
Prebuilt (+ USD $44.95)
 The XD125 option only fits the 15" cabs. Will not fit the 12" cabs.
15/6 True Crossover
Parts Only no circuit board (+ USD $77.99)
Prebuilt (+ USD $135.20)
No Handles
Flush & Dish Handles
Right Angle Handles
Strap Handles
Price: USD $517.94
  • Description
  • Kit Contents
  • Specifications
  • Related Items

Utilizing the Eminence 3015lf woofer, and 18Sound 6nm410 midrange, you get true boutique performance at a fraction of the boutique price. 
Add in the ASD1001 or 18Sound XD125 tweeter kit to add some sparkle to your box.  Strongly recommended.
The deluxe kit gives you every nut, bolt, screw, glue, and hardware needed to build your cab. 
You can build with confidence knowing that EVERYTHING in the kit will fit.
The SpeakerHardware shop has tested and tried every component in the 15/6 kit for fit and performance.
All the hardware is Penn Elcom, quality built from one of the largest cab parts companies in the world.    
The only items you need to add to complete your new bass cabinet are plywood, grille, interior foam and Duratex or other exterior finsh.
If you want the flattest response possible, or plan on using the cab for more than just
bass guitar, order the TRUE crossover options.  The tweeter is mandatory with the TRUE
We strongly suggest you vist the greenboy forum before ordering. 

fEARful 15/6 Deluxe kit: 
   • Eminence 3015lf
   • 18Sound 6NM410 midrange .
   • Optional ASD1001 tweeter with H70E CD Horn or 18Sound XD125
   • All the crossovers, please select your model from the dropdown box. High pass for the tweeter section
     includes the lpad.
   • 4 1686 Penn Elcom Rubber feet
   • 8 Protective corners, choose from Large or Small Chevrons, or 1824 Metal Corners Black or Chrome
   • 5 Styles of handles available.
   • 1 Dish with connectors, gasket, (except D023K), all the jacks, screws and bolts .  5 Styles that fit
   • 1 tube PL Premium Polyurethane Adhesive
   • 10 ft connector wire
   • 5 ft gasket tape
   • Every screw, nut, bolt, and washer required for construction in the correct quantities to build the cab.
Duratex , Acoustic foam and grilles can be found in related items. 
2 Pints of Duratex needed for a good film thickness.   
2.5ft of 2 1/2 inch acoustic foam required, not included in the kit.

Precut plywood is not part of this kit.

Complete drawings for the 15/6 here.
Complete drawings for the 15/6tube here.


  • Impedance: 8 Ohm
  • Dimensions: 20.5"w x 30"h x 16.5"d
  • Tuning Frequency: ~45-46.5 Hz
  • TYPICAL WEIGHT: 50-55 pounds

15/6 tube

The 15/6tube is for 24" and 26" wide tube heads depending on what side it's sitting.

  • Impedance: 8 Ohm
  • Dimensions: 24"w x 26"h x 16"d
  • Tuning Frequency: ~45-46.5 Hz
1 Product Reviews - Average rating 5 / 5 (Show All)

15/6 Deluxe Kit

- 11/17/2018

The kit was delayed, but Leland explained what was back-ordered and causing the delay and stayed in contact throughout the process. Top notch customer service! All my future builds will be built with components from Speaker Hardware!