Chris Cole 15-6 Sealed Bass Cabinet Deluxe Kit
1 of 3

Chris Cole 15-6 Sealed Bass Cabinet Deluxe Kit

Sealed Driver
Beta 15a ( USD $-29.00)
Price: USD $229.95
  • Description
  • Designer Notes and Video
  • Kit Contents
  • Specifications
  • Response Curve
  • Related Items

Chris Cole Designs sealed 15-6 bass guitar cabinet kit.
Chris Cole designs emphasize simplicity and performance.
Utilizing off the shelf crossovers in simply designed, well braced cabinets,
these kits give the beginning builder an easy start, or the experienced builder
an excellent performing cab in a quick build.

The sealed 15-6 bridges the gap between traditional bass cabs and modern mid loaded cabs.  Most players are used to the feel and tone of traditional cabs but,
would like more clarity and dispersion of upper mid and treble frequencies.  Many have moved on to 2-way designs using high output woofers,
fully crossed over to a midrange driver. But, some find this approach to sound too clean and, even sterile.; The sealed 15-6 runs the woofer full range
to get alittle bass cab growl. The sealed design rolls off the deep lows gradually while adding just alittle low mid bump for some fatness.
The 6.5" mid is high passed where the woofer naturally rolls off to extend upper mids and treble, while greatly increasing off axis response.
The sealed 15-6 was designed to be an easy build using common, off the shelf components, and to provide a pleasing tone with a flat amp.

  • Eminence BP1525 15" woofer or American Standard Beta 15a
  • Eminence Alpha 6a CBMRA midrange
  • Eminence pxb1k6 Crossover
  • 8 Protective corners, choose from Small Chevrons, or 1824 Metal Corners Black or Chrome
  • Choose from several Flush Handles
  • 1 Dish with connectors, gasket, all the jacks, screws and bolts.
  • 1 tube PL Premium Polyurethane Adhesive
  • 5 ft connector wire
  • 5ft gasket tape
  • 4 Penn Elcom 1686 rubber feet
  • Every screw, nut, bolt, and washer required for construction in the correct quantities
  • to build the cab.
  • 2ft of 2 1/2 inch  acoustic foam required. Not included in the kit.

  • F3 63.81hz
  • F10 42.4hz
  • 262 watts all the way down
  • 350 watts down to 80hz
  • 40lbs finished weight

Product Reviews

No Reviews For This Product.